Electrical contractor in Dharwad
ಧಾರವಾಡದಲ್ಲಿ ವಿದ್ಯುತ್ ಗುತ್ತಿಗೆದಾರರು
Dharwad is the quieter half of the twin cities: a university town of colleges, hostels and old family homes, with a growing industrial belt at Belur and Mummigatti. We rewire older houses, electrify institutions and new layouts, and take up HT and transformer work for factories on the Pune-Bengaluru highway.
What is different about electrical work here
Many homes in the old parts of Dharwad were wired decades ago for a few lights and fans. They now carry ACs, geysers, induction cooktops and EV chargers on aluminium or undersized copper wiring with rewireable fuses. We rewire in stages, add RCCB protection and earthing, and regularise the extra load with HESCOM.
Universities, colleges, hostels, coaching centres and hospitals run long hours with large lighting, lab, kitchen and lift loads. They usually need HT supply or a higher LT load, DG or UPS backup, fire-safe cable routing and a CEIG-approved installation.
Automobile, engineering and food-processing units in the KIADB areas along NH-48 need HT connections with their own transformers, HT panels, APFC panels and proper earthing for heavy machines.
What we do in Dharwad
- Complete rewiring of older houses with RCCB, MCB distribution and new earth pits
- HESCOM new connections and load enhancement for homes, PGs and shops
- Colleges, hostels and hospitals: HT supply, transformer, DG backup and LT distribution
- HT connections and transformer installation in Belur and Mummigatti industrial areas
- Layout electrification and street lighting for HDUDA-approved layouts
- CEIG drawing approval, testing and safety inspection
Dharwad is in the HESCOM area. We prepare the file to HESCOM's requirements and follow its procedures for applications, inspection and supply release.
Local authorities we coordinate with
| Power supply | HESCOM (Hubli Electricity Supply Company) |
|---|---|
| Electrical safety | Department of Electrical Inspectorate (CEIG), Government of Karnataka |
| Transmission (66 kV+) | KPTCL |
| Local body | Hubballi-Dharwad Municipal Corporation (HDMC) |
| Planning | Hubballi-Dharwad Urban Development Authority (HDUDA) |
Taluks we cover
Dharwad, Hubballi, Kalghatgi, Alnavar, Kundgol, Navalgund, Annigeri.
- 1Site visit and load study
Our engineer visits your site in Dharwad and confirms the load and supply needed.
- 2Estimate and BOQ
Itemised scope, materials, labour and statutory charges.
- 3HESCOM application and drawings
We prepare and file the application with HESCOM, and drawings for CEIG where needed.
- 4Installation by our licensed team
- ✓Testing, inspection and supply release
Test reports, CEIG inspection where applicable, then HESCOM fixes the meter and releases supply.
Questions from Dharwad
My house in Dharwad has old wiring. Do I need to rewire completely?
Not always. We first test insulation resistance, check the earthing and look at the wire sizes against today's load. Often only the main distribution board and the high-load circuits (AC, geyser, kitchen) need replacing first, and the rest can follow in stages.
Can a PG or hostel run on a domestic connection?
A paying guest or hostel run as a business is usually billed under a commercial category, not domestic. Ask HESCOM to apply the correct tariff before an inspection finds it, because back-billing for a wrong category can be expensive.
Do you work in the Belur industrial area?
Yes. We handle HT connections, transformer and HT panel installation, APFC panels, earthing and CEIG approvals for units in Belur, Mummigatti and nearby industrial areas.
Do you cover Alnavar and Kalghatgi?
Yes. We cover all of Dharwad district. The western taluks get more rain than the city, so we pay extra attention to drainage of earth pits and meter boards there.
Start your Dharwad project
Tell us the location, the load and what you need. An engineer will get back to you to plan a site visit. Email basavalalith.electricals@gmail.com or use the enquiry form.
Request a site visit